ZM12100 Testing & Compliance
Documented test results for the WinPower 12V 100Ah LiFePO4 Battery.
IP65 Testing
IP6X — PASS
IPX5 — PASS
Report LCSB08225011S001 records Model ZM12100 passing IP6X dust and IPX5 water-jet testing under IEC 60529.
ANSI/CAN/UL 2743:2023
Report STE082225116S is an independent laboratory test report for Model ZM12100 tested to ANSI/CAN/UL 2743:2023. Full test documentation available upon request.
Low-Temperature Charging Behavior
Independent testing observed charge cutoff behavior at approximately 0°C. Detailed BMS threshold wording remains pending direct model mapping.
Enclosure Material
V-0 rated PC/ABS enclosure material was used in the tested configuration.
Mechanical Testing
Mold Stress — PASS · Impact — PASS · Drop — PASS.
The report includes 0°C-conditioned samples and approximately 0.9m / 3ft drops onto concrete. These are test results, not durability superlatives.
Compliance Note
Test documentation describes the tested product and conditions. Testing does not mean the complete product is UL Listed or UL Certified. The report describes test results only.
Original laboratory reports are available upon request while reproduction and distribution terms are reviewed.